If you are searching for ways on ‘how to string an electric guitar’ then you have reached the right post! Every guitarist has to go through the phase of stringing and restringing their guitars. Although it seems like an easy job; but it surely isn’t! Most of the guitarists are barely able to tune their guitars correctly, and for them restringing a guitar is out of question.
However, don’t worry! If you want to do the chore of guitar restringing all by yourself then read the below mentioned article, which will provide important tips on accomplishing this complicated work.
Stringing a guitar is a tricky job, which requires a lot of care; but once you follow all instructions carefully, you can easily do it. So, just implement the below-mentioned pointers cautiously, and you will be able to restring electric guitars as well as acoustic ones.
So, let’s begin!
How to restring a guitar
- Assemble The Tools: Stringing or restringing a guitar becomes much easier if you ensure that the required tools are at hand for the job. The tools that you will need are a pair of fresh strings, string cutter, soft brush, guitar tuner, and string winder. Once these tools are in place, you can begin the task of restringing your guitar.
- Choose A Clean Place: Ensure that you use a clean place to do the job as there is a chance that you may misplace some of your tools, and this will only make the job more tedious. Also, ensure that the place is quiet as you have to retune the guitar as soon as the new strings are attached. A noisy area will make the retuning task difficult.
- Remove Old Strings: Loose all the strings one-by-one by unwinding the tuning key. Once the strings are loosened, remove them carefully by winding them, so that they don’t get tangled. Do this task only if you wish to reuse the string later. If not, then you can save some time by simply cutting off the strings and throwing them in the bin.
- Clean Your Guitar: It is extremely important to clean your guitar before attaching a new pair of strings to it. If you fail to do so, the dirt from the fretboard will directly stick to the new pair of strings; thus making it dirty. You can clear the dust on the fretboard by using a soft and clean brush. Alternatively, if you wish to give your fretboard a makeover than you can use some lemon oil to polish it.
- Plug In Strings: For this job, you need to understand the kind of bridge that is fixed to your guitar. Some bridges have a simple mounting system where you can simply attach your bridge pin. Make sure that the same is well-secure, as it may pop-out if pressure is applied during winding. If your guitar doesn’t have a mounting system, then you have to remove the bridge pins by using the string winder and then attach a new string on the pins. Ensure that you secure the pins on the bridge by using the same method.
- Attach Them To Tuning Keys: Once all the strings are secured in the bridge, pull all of them at once till the tuning keys. This is the trickiest part as pulling them all at once will make certain that each string has same amount of space. This in turn will ensure equal elasticity in all the strings.
- Wind The Strings: After all the strings are attached to the tuning keys, you can then proceed to wind the strings by using the string winder. Though there is no specific order required for winding the string; but, to achieve the best results, you should wind them in the order of 5A, 4D, 3G, 2B, 1E, and then 6E. During the winding process, ensure that each string has sufficient amount of space between other strings and fretboard.
- Tune Your Guitar: After winding all the strings to the tuning keys, you can proceed with the tuning of your guitar. Use your guitar tuner to properly tune each and every string and double check if needed. If you are a good guitar player, then you may not need a tuner to perform this task.
- Cut The Excess Wire: Innumerable number of guitar players prefer attaching little bit of extra wire; but, this will make it difficult to play the guitar well. So, after the tuning task is done, just cut off the extra wires by using a wire cutter. Do this only after ensuring that your guitar is properly tuned. This is because; after the extra wires are cut, you may find it difficult to tune your guitar.
By using the aforesaid method on how to restring a guitar, you can easily do it. However, here are some additional tips that you should keep in mind so that the restringing process turns into an easy task:
- Stability: Always ensure the stability of your guitar; because, if you drop the guitar by mistake then restringing will turn out to be an expensive affair. To perform the task easily, you can use a guitar support. In case you don’t have one, then lean the neck of the guitar on your neck while unwinding strings so that your guitar stays safe.
- Winding: During winding the strings, ensure that there is at least three inches of space in between the strings and the fretboard. This task can be easily accomplished by placing your thumb in between. This step is quite helpful because you can stop winding the guitar as soon as the string hits your thumb.
- Lock The Strings: Tie all strings properly to the tuning keys and then loop the two ends of the string. The next step is to crimp and tighten them on the way towards the headstock. This is to ensure that the strings are properly locked in place.
- Removing Strings: If you are restringing your electric guitar for the first time; then make sure that you don’t remove all the strings at once. This may permanently damage your guitar neck; so remove the strings one-by-one and work safely.
To conclude, if you follow the aforesaid steps properly you will be able to easily restring your guitar. Ensure that you prolong and protect the life of new strings on your guitar by keeping them clean.